The CabinetRefinishLab (904) 490-7961 Get an estimate

The Cabinet RefinishLab

Pick your hardware

New pulls and knobs are the finishing touch on a refinished kitchen, and the easiest upgrade to make while the doors are off. Pick a finish, then a style. Your picks go into your job confirmation and the hardware goes on when the doors are reinstalled.

  1. Pick a finishSatin nickel, matte black, champagne bronze or oil rubbed bronze. One finish through the whole kitchen reads as one set, even with mixed shapes.
  2. Choose a styleMost kitchens go pulls on everything, or knobs on the doors and pulls on the drawers. Note the names of the pieces you like.
  3. We install itYour hardware goes on at reinstall. Supply it yourself by model number, or have us supply it at store price plus 20%.
ShowTap any piece for details and today's price.

Pulls

5-1/16 in. (128 mm) center to center, the most common kitchen size

Knobs

1-1/4 in. is the standard size; round and square shown

Cup pulls

3 in. (76 mm) center to center, drawers only

Installation

Same holesIncludedNew hardware that uses your existing holes goes on at reinstall at no charge. It is part of the job.
New hole spacing$14 per pieceGoing from a knob to a pull, or to a different spacing, means new holes. We fill and sand the old ones before the doors are sprayed and drill the new ones with a jig at reinstall. Decide before spray day, since the filling happens first.
Measure firstIf you already have pulls, measure from the center of one screw hole to the center of the other. 3 in., 3-3/4 in. and 5-1/16 in. are the common sizes; a new pull in the same size goes straight into the existing holes.
How manyCount every door and every drawer front. One piece per door and one per drawer is the norm; wide drawers over 24 in. often take two.
PricesTap any piece to see today's price and whether it is in stock near you. Most pulls run $5 to $9 each and knobs $2 to $5, so a typical kitchen is $100 to $250 in hardware.

Send us your picks

Found your set? Send the finish and the pieces you like and they will be written into your job confirmation. Not booked yet? Request an estimate and include them there.